فراموش شده؟

پیشنهاد ویژه -11%
استاندارد aws

استاندارد AWS

2,024,000  1,800,000 

American Welding Society

استاندارد انجمن جوشکاری امریکا

ارسال بصورت سی.دی یا دی.وی.دی یا فلش مموری یا هارد دیسک اکسترنال




توضیحات محصول

Standards

The welding world is growing at an exponential rate. With each new individual who discovers a passion for the arc, there is a pressing need to develop synchronicity within the industry through the use of standards.

What is a Standard?
Simply stated, a standard is a document used repeatedly as a rule, guideline or definition. It is developed by a committee of experts who work within different areas of a particular industry – this ensures that the standard is well-rounded.

All AWS standards are approved by the American National Standards Institute (ANSI). This means that during the standards development process, AWS follows a strict set of rules and requirements that serve to govern not only the standards approval process, but also all of the technical committees responsible for their maintenance.

Specialized Volunteers
AWS standards are supported by volunteers who specialize in various industries and processes: structural, aerospace, railroad, automotive, robotics, shipbuilding and marine, bridges, heavy equipment, piping and tubing, sheet metal, brazing, soldering, plastics, thermal spray, welding product manufacturers, and general applications. AWS also publishes numerous standards and publications on safety and health in welding.

iddocnodatelanguagetitleorg
۱AWS A5.2/A5.2M۲۰۰۷EnglishSPECIFICATION FOR CARBON AND LOW – ALLOY STEEL RODS FOR OXYFUEL GAS WELDINGAWS
۲AWS A5.4/A5.4M۲۰۰۶EnglishSPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDINGAWS
۳AWS A5.5/A5.5M۲۰۰۶EnglishSPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDINGAWS
۴AWS A5.7/A5.7M۲۰۰۷EnglishSPECIFICATION FOR COPPER AND COPPER-ALLOY BARE WELDING RODS AND ELECTRODESAWS
۵AWS A5.9/A5.9M۲۰۰۶EnglishSPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODSAWS
۶AWS A5.11/A5.11M۲۰۰۵ÿ۱۹۹۷EnglishSPECIFICATION FOR NICKEL AND NICKEL ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC WELDINGAWS
۷AWS A5.16/A5.16M۲۰۰۷ÿ۲۰۰۴EnglishSPECIFICATION FOR TITANIUM AND TITANIUM-ALLOY WELDING ELECTRODES AND RODSAWS
۸AWS A5.23/A5.23M۲۰۰۷ÿ۱۹۹۷EnglishSPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDINGAWS
۱۱AWS A5.30/A5.30M۲۰۰۷EnglishSPECIFICATION FOR CONSUMABLE INSERTSAWS
۱۲AWS A5.34/A5.34M۲۰۰۷EnglishSPECIFICATION FOR NICKEL-ALLOY ELECTRODES FOR FLUX CORED ARC WELDINGAWS
۱۴AWS A10.1M۲۰۰۷EnglishSPECIFICATION FOR CALIBRATION AND PERFORMANCE TESTING OF SECONDARY CURRENT SENSING COILS AND WELD CURRENT MONITORS USED IN SINGLE-PHASE AC RESISTANCE WELDINGAWS
۱۵AWS B2.1.1.003۲۰۰۲ÿ۹۰EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF GALVANIZED STEEL (M-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۱۶AWS B2.1.1.004۲۰۰۲ÿ۹۰EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF CARBON STEEL (M-1, GROUP 1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۱۷AWS B2.1.1.007۲۰۰۲ÿ۹۰EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF GALVANIZED STEEL (M-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۱۸AWS B2.1.1.008۲۰۰۲ÿ۹۰EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1, P-1, OR S-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۱۹AWS B2.1.1/8.006۲۰۰۲ÿ۹۰EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL (M-1 TO M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۲۰AWS B2.1.1/8.010۲۰۰۲ÿ۹۰EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL (M-1, P-1 OR S-1 TO M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۲۱AWS B2.1.1/8.014۲۰۰۲ÿ۹۱EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL (M-1 TO M-8/P-8/S-8, GROUP 1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۲۲AWS B2.1.1/8.227۲۰۰۲EnglishWELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L)AWS
۲۳AWS B2.1.1/8.229۲۰۰۲EnglishWELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E309(L) -15, -16, OR -17AWS
۲۴AWS B2.1.1/8.230۲۰۰۲EnglishWELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E309(L) -15, -16, OR -17AWS
۲۵AWS B2.1.1/8.231۲۰۰۲EnglishWELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E309(L) -15, -16, OR -17AWS
۲۶AWS B2.1.1.012۲۰۰۲ÿ۹۱EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1, P-1, OR S-1 TO M-1, P-1, OR S-1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۲۷AWS B2.1.1.210۲۰۰۱ÿ۹۶EnglishGAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERTS OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2 ), 1/8 THROUGH 1-1/2 INCH THICK, INMS-1 AND ER70S-2, AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS, STANDARDS WELDING PROCEDURE SPECIFICATION (WPS) FORAWS
۲۸AWS B2.1.1.211۲۰۰۱ÿ۲۰۰۰ÿ۹۶EnglishGAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERTS FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E7018, AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS, STANDARD WELDING PROCEDURE SPECIFICAWS
۲۹AWS B2.1.1.232۲۰۰۶ÿ۲۰۰۵EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) FOLLOWED BY ARGON PLUS 25% CARBON DIOXIDE SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P- 1/S-1, GROUAWS
۳۰AWS B2.1.1.233۲۰۰۶ÿ۲۰۰۵EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) FOLLOWED BY ARGON PLUS 2% OXYGEN SHIELDED GAS METAL ARC WELDING (SPRAY TRANSFER MODE)AWS
۳۱AWS B2.1.1.234۲۰۰۶ÿ۲۰۰۵EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 AND 2), 1/8 THROUGH 1-1/2 INCH THICK, E7XT-X, AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONSAWS
۳۲AWS B2.1.1.235۲۰۰۶ÿ۲۰۰۵EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 2% OXYGEN SHIELDED GAS METAL ARC WELDING (SPRAY TRANSFER MODE) OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 AND 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-3, FLAT POSITION ONLYAWS
۳۳AWS B2.1.4.217۹۹EnglishGAS TUNGSTEN ARC WELDINGAWS
۳۴AWS B2.1.4.219۹۹EnglishGTAW FOLLOWED BY SMAWAWS
۳۵AWS B2.1.4.220۹۹EnglishGAS TUNGSTEN ARC WELDING (CONSUMABLE INSERT ROOT)AWS
۳۶AWS B2.1.4.221۹۹EnglishWPS: CHROMIUM MOLYBDENUM STEELS, PRIMARILY PIPE APPLICATIONS (M-4/P-4, GROUP 1 OR 2) – GTAW (CONSUMABLE INSERT ROOT) FOLLOWED BYAWS
۳۷AWS B2.1.5A.222۹۹EnglishGAS TUNGSTEN ARC WELDINGAWS
۳۸AWS B2.1.5A.224۹۹EnglishGTAW FOLLOWED BY SMAWAWS
۳۹AWS B2.1.5A.225۹۹EnglishGAS TUNGSTEN ARC WELDING (CONSUMABLE INSERT ROOT)AWS
۴۰AWS B2.1.5A.226۹۹EnglishGTAW (CONSUMABLE INSERT ROOT) FOLLOWED BY SMAWAWS
۴۱AWS B2.1.8.009۲۰۰۲ÿ۹۰EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۴۲AWS B2.1.8.013۲۰۰۲ÿ۹۱EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۴۳AWS B2.1.8.024۲۰۰۱ÿ۹۴EnglishGAS TUNGSTEN ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1) 1/8 THROUGH 1-1/2 INCH THICK, AS-WELDED CONDITION, STANDARD WELDING PROCEDURE SPECIFICATION FORAWS
۴۴AWS B2.1.8.025۲۰۰۱ÿ۹۴EnglishGAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, AS-WELDED CONDITION, STANDARD WELDING PROCEDURE SPECIFICATION FORAWS
۴۵AWS B2.1.8.212۲۰۰۱ÿ۲۰۰۰ÿ۹۷EnglishGAS TUNGSTEN ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, ER3XX, AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS, STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FORAWS
۴۶AWS B2.1.8.214۲۰۰۱ÿ۲۰۰۰ÿ۹۷EnglishGAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, ER3XX, E3XX-XX, AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS, STANDARD WELDING PROCEDURE SPECIFICATIONAWS
۴۷AWS B2.1.8.215۲۰۰۱ÿ۱۹۹۸EnglishGAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1) 1/8 THROUGH 1-1/2 INCH THICK, IN3XX AND ER3XX, AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONSAWS
۴۸AWS B2.1.22.015۲۰۰۲ÿ۹۱EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF ALUMINUM (M/P/S-22 TO M/P/S-22), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۴۹AWS B4.0۲۰۰۷ÿ۹۸ÿ۹۲ÿ۸۵EnglishSTANDARD METHODS FOR MECHANICAL TESTING OF WELDSAWS
۵۰AWS BRH۲۰۰۷ÿ۱۹۹۱EnglishBRAZING HANDBOOKAWS
۵۱AWS C3.4M/C3.4۲۰۰۷EnglishSPECIFICATION FOR TORCH BRAZINGAWS
۵۲AWS C3.5M/C3.5۲۰۰۷EnglishSPECIFICATION FOR INDUCTION BRAZINGAWS
۵۳AWS C4.3/C4.3M۲۰۰۷ÿ۲۰۰۴EnglishRECOMMENDED PRACTICES FOR SAFE AND OXYFUEL GAS HEATING TORCH OPERATIONAWS
۵۴AWS C4.4/C4.4M۲۰۰۷ÿ۲۰۰۴EnglishRECOMMENDED PRACTICES FOR HEAT SHAPING AND STRAIGHTENING WITH OXYFUEL GAS HEATING TORCHESAWS
۵۵AWS D1.6/D1.6M۲۰۰۷EnglishSTRUCTURAL WELDING CODE – STAINLESS STEELAWS
۵۶AWS D1.9/D1.9M۲۰۰۷EnglishSTRUCTURAL WELDING CODE – TITANIUMAWS
۵۷AWS D15.1/D15.1M۲۰۰۷ ERRATA 2007ÿ۲۰۰۷EnglishRAILROAD WELDING SPECIFICATION FOR CARS AND LOCOMOTIVESAWS
۵۸AWS D18.2۹۹EnglishGUIDE TO WELD DISCOLORATION LEVELS ON INSIDE OF AUSTENITIC STAINLESS STEEL TUBEAWS
۶۱AWS EWH.13۲۰۰۷EnglishEFFECTS OF WELDING ON HEALTH, VOL. 13AWS
۶۲AWS F4.1۲۰۰۷ÿ۱۹۹۹ÿ۱۹۹۴ÿ۱۹۸۸ÿ۱۹۸۰EnglishSAFE PRACTICES FOR THE PREPARATION OF CONTAINERS AND PIPING FOR WELDING AND CUTTINGAWS
۶۴AWS G2.4/G2.4M۲۰۰۷EnglishGUIDE FOR THE FUSION WELDING OF TITANIUM AND TITANIUM ALLOYSAWS
۶۹AWS QC10۲۰۰۶ÿ۲۰۰۴ÿ۹۵EnglishSPECIFICATION FOR QUALIFICATION AND CERTIFICATION OF LEVEL 1 – ENTRY WELDERAWS
۷۱AWS WHB.3.9۲۰۰۷EnglishWELDING PROCESSES – PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3AWS
۷۳AWS F2.2۲۰۰۱ÿ۸۹ (R1997)ÿ۸۹ÿ۸۴EnglishLENS SHADE SELECTORAWS
۷۴AWS A3.0 ERRATA۲۰۰۱EnglishSTANDARD WELDING TERMS AND DEFINITIONS – INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING *AWS
۷۵AWS A5.28/A5.28M ERRATA۲۰۰۷EnglishSPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING *AWS
۷۶AWS A5.28/A5.28M ERRATA۲۰۰۷EnglishSPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING *AWS
۷۷AWS A5.7/A5.7M ERRATA۲۰۰۷EnglishSPECIFICATION FOR COPPER AND COPPER-ALLOY BARE WELDING RODS AND ELECTRODES *AWS
۷۸AWS A5.9/A5.9M ERRATA۲۰۰۶EnglishSPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS *AWS
۷۹AWS B2.1  ERRATA۲۰۰۵EnglishSPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION *AWS
۸۰AWS B2.1.5A.223 ERRATA۲۰۰۵EnglishWELDING PROCEDURE SPECIFICATION (WPS) FOR; SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), E9018-B3, 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT CONDITION, PRIMARILY PIPE APPLICATIONS *AWS
۸۱AWS B2.1.8.005 ERRATA۲۰۰۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF AUSTENITIC STAINLESS STEEL (M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING *AWS
۸۲AWS C5.10/C5.10M ERRATA۲۰۰۳EnglishRECOMMENDED PRACTICES FOR SHIELDING GASES FOR WELDING AND CUTTING *AWS
۸۳AWS C5.4 ERRATA۱۹۹۳EnglishRECOMMENDED PRACTICES FOR STUD WELDING *AWS
۸۴AWS CM ERRATA۲۰۰۰EnglishCERTIFICATION MANUAL FOR WELDING INSPECTORS *AWS
۸۵AWS D14.7/D14.7M ERRATA۲۰۰۵EnglishRECOMMENDED PRACTICES FOR SURFACING AND RECONDITIONING OF INDUSTRIAL MILL ROLLS *AWS
۸۶AWS D17.1 ERRATA۲۰۰۱EnglishSPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS *AWS
۸۷AWS B2.1.001۹۰EnglishSHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 7/8 INCH, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING, STANDARD WELDING PROCEDURE, SPECIFICATION FORAWS
۸۹AWS B2.1.002۹۰EnglishGAS TUNGSTEN ARC WELDING OF CARBON STEEL, (M 1/P 1, GROUP 1 OR 2), 3/16 THROUGH 7/8 INCH, IN THE AS WELDED CONDITION, WITH OR WITHOUT BACKING, STANDARD WELDING PROCEDURE SPECIFICATION FORAWS
۹۰AWS A9.2۹۲EnglishSTANDARD GUIDE FOR RECORDING ARC WELD MATERIAL PROPERTY AND NONDESTRUCTIVE EXAMINATION DATA IN COMPUTERIZED DATABASESAWS
۹۱AWS B2.1.1.201۱۹۹۶(R2007)ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED CONDITION, PRIMARILY PIPE APPLICAWS
۹۲AWS B2.1.1.202۱۹۹۶(R2007)ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED CONDITION, PRIMARILY PIPE APPLAWS
۹۳AWS B2.1.1.203۱۹۹۶(R2007)ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL UPHILL) AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONSAWS
۹۴AWS B2.1.1.204۱۹۹۶(R2007)ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL DOWNHILL ROOT WITH THE BALANCE VERTICAL UPHILL), AS-WELDED CONDITION, PRIMARILY PIPE APAWS
۹۵AWS B2.1.1.206۱۹۹۶(R2007)ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED OR PWHT CONDITION, PRIMARILYAWS
۹۶AWS B2.1.1.207۱۹۹۶(R2007)ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2, AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONSAWS
۹۷AWS B2.1.1.208۱۹۹۶(R2007)ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E7018, AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONSAWS
۹۸AWS B2.1.1.209۱۹۹۶(R2007)ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2 AND E7018, AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE AAWS
۹۹AWS B2.1.8.213۱۹۹۷(R2007)ÿ۱۹۹۷EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E3XX-XX, AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONSAWS
۱۰۱AWS A9.1۹۲EnglishSTANDARD GUIDE FOR DESCRIBING ARC WELDS IN COMPUTERIZED MATERIAL PROPERTY AND NONDESTRUCTIVE EXAMINATION DATABASESAWS
۱۰۳AWS QC5۹۱EnglishSTANDARD FOR AWS CERTIFICATION OF WELDING EDUCATORSAWS
۱۰۴AWS QC7۹۳EnglishSTANDARD FOR AWS CERTIFIED WELDERSAWS
۱۰۵AWS B2.1.1.016۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E7018, AS-WELDED OR PWHT CONDITIONAWS
۱۰۶AWS B2.1.1.017۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010, AS-WELDED OR PWHT CONDITIONAWS
۱۰۷AWS B2.1.1.019۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; CO[2] SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED CONDITIONAWS
۱۰۸AWS B2.1.1.021۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S2 AND E7018, AS-WELDED OR PWHT CONDITIONAWS
۱۰۹AWS B2.1.1.026۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018, AS-WELDED OR PWHT CONDITIONAWS
۱۱۰AWS B2.1.1.027۹۸ÿ۹۵EnglishSELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E71T-11, AS-WELDED CONDITION, [SITE LICENSE], STANDARD WELDING PROCEDURE SPECIFICATION FORAWS
۱۱۱AWS B2.1.8.023۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, AS-WELDED CONDITIONAWS
۱۱۲AWS B5.14۲۰۰۲EnglishSPECIFICATION FOR THE QUALIFICATION OF WELDING SALES REPRESENTATIVESAWS
۱۱۵AWS QC4۸۹EnglishSTANDARD FOR ACCREDITATION OF TEST FACILITIES FOR AWS CERTIFIED WELDER PROGRAMAWS
۱۱۶AWS B2.1.1.205۱۹۹۶(R2007)ÿ۱۹۹۶ ERRATA 1996ÿ۱۹۹۶EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED OR PWHT CONDITION, PRIMARILY PAWS
۱۱۸AWS FGW۷۹EnglishFUMES AND GASES IN THE WELDING ENVIRONMENT( NOT Completed )AWS
۱۱۹AWS F2.3M۲۰۰۱EnglishSPECIFICATION FOR USE AND PERFORMANCE OF TRANSPARENT WELDING CURTAINS AND SCREENSAWS
۱۲۰AWS F1.6۲۰۰۳EnglishGUIDE FOR ESTIMATING WELDING EMISSIONS FOR EPA AND VENTILATION PERMIT REPORTINGAWS
۱۲۱AWS PRGT۹۹EnglishPRACTICAL REFERENCE GUIDE TO WELDING TITANIUMAWS
۱۲۲AWS B2.1.8.005۲۰۰۲ ERRATA 2004ÿ۲۰۰۲ÿ۹۰EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF AUSTENITIC STAINLESS STEEL (M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۱۲۳AWS B2.1.1/8.228۲۰۰۲EnglishWELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E309(L) -15, -16, OR -17AWS
۱۲۴AWS B2.1.1.022۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018, AS-WELDED OR PWHT CONDITIONAWS
۱۲۵AWS B5.15۲۰۰۳ AMD 2007ÿ۲۰۰۳EnglishSPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERSAWS
۱۲۶AWS C3.8M/C3.8۲۰۰۵EnglishSPECIFICATION FOR THE ULTRASONIC EXAMINATION OF BRAZED JOINTSAWS
۱۲۷AWS C4.5M۲۰۰۶ÿ۲۰۰۰ ERRATA 2000ÿ۲۰۰۰EnglishUNIFORM DESIGNATION SYSTEM FOR OXYFUEL NOZZLESAWS
۱۲۸AWS C7.3۱۹۹۹(R2003)ÿ۱۹۹۹EnglishPROCESS SPECIFICATION FOR ELECTRON BEAM WELDINGAWS
۱۲۹AWS D10.8۹۶ÿ۸۶ÿ۷۸EnglishRECOMMENDED PRACTICES FOR WELDING OF CHROMIUM-MOLYBDENUM STEEL PIPING AND TUBINGAWS
۱۳۰AWS D18.1۹۹EnglishSPECIFICATION FOR WELDING OF AUSTENITIC STAINLESS STEEL TUBE AND PIPE SYSTEMS IN SANITARY (HYGIENIC) APPLICATIONSAWS
۱۳۲AWS B5.15 AMD۲۰۰۳ AMD 2007ÿ۲۰۰۳EnglishSPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERSAWS
۱۳۳AWS B2.1.1.011۲۰۰۲ ERRATA 2005ÿ۲۰۰۲ÿ۹۱EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF GALVANIZED STEEL (M-1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKINGAWS
۱۳۴AWS A5.31۹۲(R2003)ÿ۹۲EnglishSPECIFICATION FOR FLUXES FOR BRAZING AND BRAZE WELDINGAWS
۱۳۵AWS B5.1۲۰۰۳ ERRATA 2007ÿ۲۰۰۳EnglishSPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORSAWS
۱۳۶AWS B5.2۲۰۰۱EnglishSPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTOR SPECIALISTS AND WELDING INSPECTOR ASSISTANTSAWS
۱۳۷AWS B5.9۲۰۰۶ÿ۲۰۰۰EnglishSPECIFICATION FOR THE QUALIFICATION OF WELDING SUPERVISORSAWS
۱۳۸AWS D10.13/D10.13M۲۰۰۱EnglishRECOMMENDED PRACTICE FOR BRAZING OF COPPER PIPE AND TUBING FOR MEDICAL GAS SYSTEMSAWS
۱۴۰AWS PRGHF۲۰۰۲EnglishTHE PRACTICAL REFERENCE GUIDE TO HARDFACINGAWS
۱۴۱AWS PRGQA۲۰۰۱EnglishTHE PRACTICAL REFERENCE GUIDE FOR HIGH QUALITY FUSION WELDING OF ALUMINUMAWS
۱۴۲AWS B2.1.4.218۱۹۹۹ ERRATA 2005ÿ۱۹۹۹EnglishWELDING PROCEDURE SPECIFICATION (WPS) FOR; SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), E8018-B2, 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT CONDITION, PRIMARILY PIPEAWS
۱۴۳AWS B2.1.5A.223۱۹۹۹ ERRATA 2005ÿ۱۹۹۹EnglishWELDING PROCEDURE SPECIFICATION (WPS) FOR; SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), E9018-B3, 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT CONDITION, PRIMARILY PIPE APPLICATIONSAWS
۱۴۴AWS B5.16۲۰۰۶ÿ۲۰۰۱EnglishSPECIFICATION FOR THE QUALIFICATION OF WELDING ENGINEERSAWS
۱۴۵AWS F1.1۲۰۰۶ÿ۱۹۹۹ÿ۱۹۹۲ÿ۱۹۸۵EnglishMETHODS FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSESAWS
۱۴۶AWS G1.6۲۰۰۶EnglishSPECIFICATION FOR THE QUALIFICATION OF PLASTICS WELDING INSPECTORS FOR HOT GAS, HOT GAS EXTRUSION, AND HEATED TOOL BUTT THERMOPLASTIC WELDSAWS
۱۴۷AWS B2.1.8.216۲۰۰۱ÿ۱۹۹۸EnglishGAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STEEL (M-8/P-8/S-8, GROUP 1) 1/8 THROUGH 1-1/2 INCH THICK, IN3XX, ER3XX, AND E3XX-XX, AS-WELDED CONDITION, SWPSAWS
۱۴۸AWS A5.12/A5.12M۱۹۹۸(R2007)ÿ۱۹۹۸EnglishSPECIFICATION FOR TUNGSTEN AND TUNGSTEN ALLOY ELECTRODES FOR ARC WELDING AND CUTTINGAWS
۱۴۹AWS B5.4۲۰۰۵EnglishSPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIESAWS
۱۵۰AWS D16.4M/D16.4۲۰۰۵EnglishSPECIFICATION FOR THE QUALIFICATION OF ROBOTIC ARC WELDING PERSONNELAWS
۱۵۱AWS F1.2۲۰۰۶ÿ۱۹۹۹ÿ۱۹۹۲ÿ۱۹۸۵EnglishLABORATORY METHOD FOR MEASURING FUME GENERATION RATES AND TOTAL FUME EMISSION OF WELDING AND ALLIED PROCESSESAWS
۱۵۳AWS QC1۲۰۰۷ÿ۲۰۰۶ÿ۱۹۹۶ÿ۱۹۸۸ÿ۱۹۸۶EnglishSTANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORSAWS
۱۵۴AWS QC19۲۰۰۲EnglishSTANDARD FOR THE AWS CERTIFICATION OF ROBOTIC ARC WELDING PERSONNELAWS
۱۵۵AWS B2.1.1.018۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E71T-8, AS-WELDED CONDITIONAWS
۱۵۶AWS B2.1.1.020۱۹۹۴(R2005)ÿ۱۹۹۴EnglishSTANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR; 75% AR/25% CO[2] SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED OR PWHT CONDITIONAWS
۱۵۷AWS A4.3۹۳(R2006)ÿ۹۳(R1997)ÿ۹۳ÿ۸۶EnglishDETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDINGAWS
۱۵۸AWS A5.19۹۲(R2006)ÿ۹۲(R1997)ÿ۹۲ÿ۸۰EnglishSPECIFICATION FOR MAGNESIUM ALLOY WELDING ELECTRODES AND RODSAWS
۱۵۹AWS A5.24/A5.24M۲۰۰۵EnglishSPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM-ALLOY WELDING ELECTRODES AND RODSAWS
۱۶۰AWS B5.5۲۰۰۰EnglishSPECIFICATION FOR THE QUALIFICATION OF WELDING EDUCATORSAWS
۱۶۱AWS C2.25/C2.25M۲۰۰۲EnglishSPECIFICATION FOR THERMAL SPRAY – SOLID AND COMPOSITE WIRE AND CERAMIC RODSAWS
۱۶۲AWS C3.7M/C3.7۲۰۰۵EnglishSPECIFICATION FOR ALUMINUM BRAZINGAWS
۱۶۳AWS D16.1M/D16.1۲۰۰۴EnglishSPECIFICATION FOR ROBOTIC ARC WELDING SAFETYAWS
۱۶۴AWS A5.3/A5.3M۱۹۹۹(R2007)ÿ۱۹۹۹EnglishSPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ELECTRODES FOR SHIELDED METAL ARC WELDINGAWS
۱۶۵AWS A5.32/A5.32M۱۹۹۷(R2007)ÿ۱۹۹۷EnglishSPECIFICATION FOR WELDING SHIELDING GASESAWS
۱۶۶AWS C2.21M/C2.21۲۰۰۳EnglishSPECIFICATION FOR THERMAL SPRAY EQUIPMENT ACCEPTANCE INSPECTIONAWS
۱۶۷AWS D8.7M۲۰۰۵EnglishRECOMMENDED PRACTICES FOR AUTOMOTIVE WELD QUALITY – RESISTANCE SPOT WELDINGAWS
۱۶۸AWS D10.6/D10.6M۲۰۰۰EnglishRECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING OF TITANIUM PIPING AND TUBINGAWS
۱۶۹AWS FWSH۹۷EnglishDESIGN HANDBOOK FOR CALCULATING FILLET WELD SIZESAWS
۱۷۰AWS G1.2M/G1.2۹۹EnglishSPECIFICATION FOR STANDARDIZED ULTRASONIC WELDING TEST SPECIMEN FOR THERMOPLASTICSAWS
۱۷۱AWS PRGC۹۹EnglishPRACTICAL REFERENCE GUIDE FOR CORROSION OF WELDS: CAUSES AND CURESAWS
۱۷۲AWS D8.8M۲۰۰۷EnglishSPECIFICATION FOR AUTOMOTIVE WELD QUALITY – ARC WELDING OF STEELAWS
۱۷۳AWS F1.3M۲۰۰۶EnglishA SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENTAWS
۱۷۴AWS HOT۸۷EnglishHOT/HANDS-ON TRAINING TEXTAWS
۱۷۵AWS A4.4M۲۰۰۱(R2006)ÿ۲۰۰۱EnglishSTANDARD PROCEDURES FOR DETERMINATION OF MOISTURE CONTENT OF WELDING FLUXES AND WELDING ELECTRODE FLUX COVERINGSAWS
۱۷۶AWS A5.15۹۰(R2006)ÿ۹۰(R1997)ÿ۹۰ÿ۸۲EnglishSPECIFICATION FOR WELDING ELECTRODES AND RODS FOR CAST IRONAWS
۱۷۷AWS C5.3۲۰۰۰ÿ۹۱ÿ۸۲(R1989)ÿ۸۲EnglishRECOMMENDED PRACTICES FOR AIR CARBON ARC GOUGING AND CUTTINGAWS
۱۷۸AWS C6.2/C6.2M۲۰۰۶EnglishSPECIFICATION FOR FRICTION WELDING OF METALSAWS
۱۷۹AWS D16.2/D16.2M۲۰۰۷ÿ۲۰۰۱EnglishGUIDE FOR COMPONENTS OF ROBOTIC AND AUTOMATIC ARC WELDING INSTALLATIONSAWS
۱۸۰AWS PHB.3۲۰۰۴ÿ۹۶EnglishTHE EVERYDAY POCKET HANDBOOK ON WELDED JOINT DETAILS FOR STRUCTURAL APPLICATIONSAWS
۱۸۲AWS PRGVT۹۹EnglishPRACTICAL REFERENCE GUIDE FOR WELDING INSPECTION MANAGEMENT: VISUAL INSPECTION OF PRESSURE VESSELS AND PRESSURE PIPINGAWS
۱۸۳AWS QC12۹۶EnglishSPECIFICATION FOR QUALIFICATION AND CERTIFICATION FOR LEVEL 3 – EXPERT WELDERAWS
۱۸۴AWS A5.25/A5.25M۹۷(R2003)ÿ۹۷EnglishSPECIFICATION FOR CARBON AND LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR ELECTROSLAG WELDINGAWS
۱۸۵AWS A5.26/A5.26M۹۷(R2003)ÿ۹۷EnglishSPECIFICATION FOR CARBON AND LOW-ALLOY STEEL ELECTRODES FOR ELECTROGAS WELDINGAWS
۱۸۶AWS PHB.1۹۴EnglishEVERYDAY POCKET HANDBOOK FOR ARC WELDING STEELAWS
۱۸۷AWS PHB.2۲۰۰۰EnglishEVERYDAY POCKET HANDBOOK FOR VISUAL INSPECTION AND WELD DISCONTINUITIES, THEAWS
۱۸۹AWS PRG۹۵EnglishPRACTICAL REFERENCE GUIDE TO RADIOGRAPHIC INTERPRETATION ACCEPTANCE CRITERIAAWS
۱۹۰AWS PRGWM۹۹EnglishPRACTICAL REFERENCE GUIDE TO WELDING METALLURGY: KEY CONCEPTS FOR WELDABILITYAWS
۱۹۱AWS A5.13۲۰۰۰ÿ۸۰(R1989)ÿ۸۰EnglishSOLID SURFACING WELDING RODS AND ELECTRODES, SPECIFICATION FOR,AWS
۱۹۲AWS ARE-10۲۰۰۱EnglishMONITORING AND CONTROL OF WELDING AND JOINING PROCESSESAWS
۱۹۴AWS C6.1۸۹(R1998)ÿ۸۹EnglishRECOMMENDED PRACTICES FOR FRICTION WELDINGAWS
۱۹۵AWS D10.11M/D10.11۲۰۰۷EnglishGUIDE FOR ROOT PASS WELDING OF PIPE WITHOUT BACKINGAWS
۱۹۶AWS F3.2M/F3.2۲۰۰۱EnglishVENTILATION GUIDE FOR WELD FUMEAWS
۱۹۷AWS G1.10M۲۰۰۱EnglishGUIDE FOR THE EVALUATION OF HOT GAS, HOT GAS EXTRUSION, AND HEATED TOOL BUTT THERMOPLASTIC WELDSAWS
۱۹۸AWS EWH.4۸۳EnglishEFFECTS OF WELDING ON HEALTH 4AWS
۱۹۹AWS ARE-11۲۰۰۱EnglishMECHANIZED, AUTOMATED, AND ROBOTIC WELDINGAWS
۲۰۰AWS D18.3/D18.3M۲۰۰۵EnglishSPECIFICATION FOR WELDING OF TANKS, VESSELS, AND OTHER EQUIPMENT IN SANITARY (HYGIENIC) APPLICATIONSAWS
۲۰۱AWS EWH.3۸۳EnglishEFFECTS OF WELDING ON HEALTH 3AWS
۲۰۲AWS PHB.6۲۰۰۴ÿ۹۸EnglishEVERYDAY POCKET HANDBOOK FOR THE EVERYDAY POCKET HANDBOOK FOR VISUAL INSPECTION OF AWS D1.1 STRUCTURAL WELDING CODE’S FABRICATION AND WELDING REQUIREMENTSAWS
۲۰۳AWS PRGWA۲۰۰۲EnglishTHE PRACTICAL REFERENCE GUIDE TO WELDING ALUMINUM IN COMMERCIAL APPLICATIONSAWS
۲۰۴AWS QC11۹۶EnglishSPECIFICATION FOR QUALIFICATION AND CERTIFICATION FOR LEVEL 2 – ADVANCED WELDERSAWS
۲۰۵AWS A5.10/A5.10M۱۹۹۹(R2007)ÿ۱۹۹۹EnglishSPECIFICATION FOR BARE ALUMINUM AND ALUMINUM-ALLOY WELDING ELECTRODES AND RODSAWS
۲۰۶AWS A5.17/A5.17M۱۹۹۷(R2007)ÿ۱۹۹۷EnglishSPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDINGAWS
۲۰۷AWS A5.21۲۰۰۱ÿ۸۰(R1989)ÿ۸۰EnglishSPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACINGAWS
۲۰۸AWS A1.1۲۰۰۱ÿ۹۸ÿ۸۹ÿ۸۰EnglishMETRIC PRACTICE GUIDE FOR THE WELDING INDUSTRYAWS
۲۰۹AWS AWN۱۹۷۹EnglishARC WELDING AND CUTTING NOISEAWS
۲۱۰AWS C2.18۱۹۹۳ ERRATA 1993ÿ۱۹۹۳EnglishGUIDE FOR THE PROTECTION OF STEEL WITH THERMAL SPRAYED COATINGS OF ALUMINUM AND ZINC AND THEIR ALLOYS AND COMPOSITESAWS
۲۱۱AWS C2.20/C2.20M۲۰۰۲EnglishSPECIFICATION FOR THERMAL SPRAYING ZINC ANODES ON STEEL REINFORCED CONCRETEAWS
۲۱۲AWS D8.1M۲۰۰۷EnglishSPECIFICATION FOR AUTOMOTIVE WELD QUALITY – RESISTANCE SPOT WELDING OF STEELAWS
۲۱۳AWS D8.6۲۰۰۵ÿ۱۹۷۷EnglishAUTOMOTIVE RESISTANCE SPOT WELDING ELECTRODESAWS
۲۱۴AWS SP۱۹۸۸EnglishSAFE PRACTICESAWS
۲۱۵AWS A5.18/A5.18M۲۰۰۵ÿ۲۰۰۱EnglishSPECIFICATION FOR CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDINGAWS
۲۱۶AWS ARE-8۲۰۰۱EnglishSYMBOLS FOR JOINING AND INSPECTIONAWS
۲۱۷AWS B1.11۲۰۰۰ÿ۸۸EnglishGUIDE FOR THE VISUAL EXAMINATION OF WELDSAWS
۲۱۸AWS D10.4۸۶(R2000)ÿ۸۶(R1992)ÿ۸۶ÿ۷۹EnglishRECOMMENDED PRACTICES FOR WELDING AUSTENITIC CHROMIUM-NICKEL STAINLESS STEEL PIPING AND TUBINGAWS
۲۱۹AWS SGSH۲۰۰۳EnglishTHE INDEPENDENT SHOP’S GUIDE TO WELDING SAFETY AND HEALTHAWS
۲۲۰AWS EWH.5۸۷EnglishEFFECTS OF WELDING ON HEALTH 5AWS
۲۲۱AWS C4.2/C4.2M۲۰۰۶EnglishRECOMMENDED PRACTICES FOR SAFE OXYFUEL GAS CUTTING TORCH OPERATIONAWS
۲۲۲AWS C5.4۱۹۹۳ ERRATA 1993ÿ۱۹۹۳ÿ۸۴(R1989)ÿ۸۴EnglishRECOMMENDED PRACTICES FOR STUD WELDINGAWS
۲۲۳AWS D17.2/D17.2M۲۰۰۷EnglishSPECIFICATION FOR RESISTANCE WELDING FOR AEROSPACE APPLICATIONSAWS
۲۲۴AWS UEAW۱۹۸۶EnglishHANDBOOK ON THE ULTRASONIC EXAMINATION OF AUSTENITIC WELDSAWS
۲۲۵AWS C5.4 ERRATA۱۹۹۳ ERRATA 1993ÿ۱۹۹۳ÿ۸۴(R1989)ÿ۸۴EnglishRECOMMENDED PRACTICES FOR STUD WELDINGAWS
۲۲۶AWS EWH.2۸۱EnglishEFFECTS OF WELDING ON HEALTH 2AWS
۲۲۷AWS GWF۱۹۹۸EnglishGUIDE FOR SETTING UP A WELDER TRAINING FACILITYAWS
۲۲۸AWS A5.28/A5.28M۲۰۰۵ ERRATA 2007ÿ۲۰۰۵EnglishSPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDINGAWS
۲۲۹AWS A5.8/A5.8M۲۰۰۴ ERRATA 2004ÿ۲۰۰۴EnglishSPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDINGAWS
۲۳۰AWS LVOS۸۳EnglishLAB VALIDATION OF OZONE SAMPLING WITH SPILL PROOF IMPINGERSAWS
۲۳۱AWS ARE-4۲۰۰۱EnglishWELDING METALLURGYAWS
۲۳۲AWS B1.10۹۹ÿ۸۶(R1992)ÿ۸۶EnglishGUIDE FOR THE NONDESTRUCTIVE EXAMINATION OF WELDSAWS
۲۳۳AWS C2.23M/C2.23۲۰۰۳EnglishSPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEELAWS
۲۳۴AWS D10.12M/D10.12۲۰۰۰EnglishGUIDE FOR WELDING MILD STEEL PIPEAWS
۲۳۵AWS D15.2۲۰۰۳ ERRATA 2005ÿ۲۰۰۳ÿ۹۴EnglishRECOMMENDED PRACTICES FOR THE WELDING OF RAILS AND RELATED RAIL COMPONENTS FOR USE BY RAIL VEHICLESAWS
۲۳۶AWS A5.20/A5.20M۲۰۰۵EnglishSPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDINGAWS
۲۳۷AWS C4.6M۲۰۰۶EnglishTHERMAL CUTTING – CLASSIFICATION OF THERMAL CUTS – GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCESAWS
۲۳۹AWS EWH.8۹۴EnglishEFFECTS OF WELDING ON HEALTH 8AWS
۲۴۰AWS GTW۲۰۰۵EnglishGUIDE TO WELDABILITY CARBON AND LOW ALLOY STEELSAWS
۲۴۱AWS A4.2M۲۰۰۶EnglishSTANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS STEEL WELD METALAWS
۲۴۲AWS B2.2۹۱ÿ۸۵EnglishSTANDARD FOR BRAZING PROCEDURE AND PERFORMANCE QUALIFICATIONAWS
۲۴۳AWS B2.4۲۰۰۶EnglishSPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION FOR THERMOPLASTICSAWS
۲۴۴AWS C5.2۲۰۰۱ÿ۸۳(R1994)ÿ۸۳(R1989)ÿ۸۳EnglishRECOMMENDED PRACTICES FOR PLASMA ARC CUTTING AND GOUGINGAWS
۲۴۵AWS A5.29/A5.29M۲۰۰۵EnglishSPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDINGAWS
۲۴۶AWS F1.5M۲۰۰۳EnglishMETHODS FOR SAMPLING AND ANALYZING GASES FROM WELDING AND ALLIED PROCESSESAWS
۲۴۷AWS SHF۲۰۰۳ÿ۹۸ÿ۹۲EnglishSAFETY AND HEALTH FACT SHEETS: 3RD EDITIONAWS
۲۴۹AWS A5.1M/A5.1۲۰۰۴ ERRATA 2004ÿ۲۰۰۴EnglishSPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDINGAWS
۲۵۰AWS ARE-12۲۰۰۱EnglishECONOMICS OF WELDING AND CUTTINGAWS
۲۵۱AWS G2.1/G2.1M۲۰۰۲ ERRATA 2003ÿ۲۰۰۲EnglishGUIDE FOR THE JOINING OF WROUGHT NICKEL-BASED ALLOYSAWS
۲۵۲AWS EWH.7۹۰EnglishEFFECTS OF WELDING ON HEALTH 7AWS
۲۵۳AWS EWH.6۸۹EnglishEFFECTS OF WELDING ON HEALTH 6AWS
۲۵۴AWS ARE-6۲۰۰۱EnglishTEST METHODS FOR EVALUATING WELDED JOINTSAWS
۲۵۵AWS C5.10/C5.10M۲۰۰۳ ERRATA 2003ÿ۲۰۰۳EnglishRECOMMENDED PRACTICES FOR SHIELDING GASES FOR WELDING AND CUTTINGAWS
۲۵۶ANSI Z49.1۲۰۰۵EnglishSAFETY IN WELDING, CUTTING, AND ALLIED PROCESSESAWS
۲۵۷AWS D14.7/D14.7M۲۰۰۵EnglishRECOMMENDED PRACTICES FOR SURFACING AND RECONDITIONING OF INDUSTRIAL MILL ROLLSAWS
۲۵۸AWS EWH.9۹۵EnglishEFFECTS OF WELDING ON HEALTH 9AWS
۲۵۹AWS ARE-7۲۰۰۱EnglishRESIDUAL STRESS AND DISTORTIONAWS
۲۶۰AWS C5.7۲۰۰۰(R2006)ÿ۲۰۰۰ÿ۸۹(R1994)ÿ۸۹ÿ۸۱EnglishRECOMMENDED PRACTICES FOR ELECTROGAS WELDINGAWS
۲۶۱AWS CAWF۸۳EnglishCHARACTERIZATION OF ARC WELDING FUMESAWS
۲۶۲AWS D9.1M/D9.1۲۰۰۶ÿ۲۰۰۰EnglishSHEET METAL WELDING CODEAWS
۲۶۳AWS PARW۹۸EnglishTHE PROFESSIONAL’S ADVISOR ON RESISTANCE WELDINGAWS
۲۶۴AWS EWH.11۲۰۰۱EnglishEFFECTS OF WELDING ON HEALTH VOL. 11AWS
۲۶۵AWS C5.1۷۳EnglishRECOMMENDED PRACTICES FOR PLASMA ARC WELDINGAWS
۲۶۶AWS C5.6۸۹(R1994)ÿ۸۹ÿ۷۹EnglishRECOMMENDED PRACTICES FOR GAS METAL ARC WELDINGAWS
۲۶۸AWS D8.9M۲۰۰۲EnglishRECOMMENDED PRACTICES FOR TEST METHODS FOR EVALUATING THE RESISTANCE SPOT WELDING BEHAVIOR OF AUTOMOTIVE SHEET STEEL MATERIALSAWS
۲۶۹AWS D1.4/D1.4M۲۰۰۵ ERRATA 2005ÿ۲۰۰۵EnglishSTRUCTURAL WELDING – REINFORCING STEELAWS
۲۷۰AWS C2.16/C2.16M۲۰۰۲EnglishGUIDE FOR THERMAL SPRAY OPERATOR QUALIFICATIONAWS
۲۷۱AWS D3.7۲۰۰۴ ERRATA 2004ÿ۲۰۰۴ÿ۹۰ÿ۸۳EnglishGUIDE FOR ALUMINUM HULL WELDINGAWS
۲۷۲AWS ARE-5۲۰۰۱EnglishDESIGN FOR WELDINGAWS
۲۷۳AWS EWH.10EnglishEFFECTS OF WELDING ON HEALTH 10AWS
۲۷۴AWS G1.1M/G1.1۲۰۰۶EnglishGUIDE TO ULTRASONIC ASSEMBLY OF THERMOPLASTICSAWS
۲۷۵AWS CC-IM۱۹۹۸EnglishCLINIC INSTRUCTOR’S MANUAL TO CC-RMAWS
۲۷۶AWS D17.1۲۰۰۱ ERRATA 2001ÿ۲۰۰۱EnglishSPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONSAWS
۲۷۷AWS PASS۱۹۹۹EnglishPROFESSIONAL’S ADVISOR ON WELDING OF STAINLESS STEELAWS
۲۷۸AWS EWH.12۲۰۰۳EnglishEFFECTS OF WELDING ON HEALTH VOL. 12AWS
۲۷۹AWS D10.10/D10.10M۹۹EnglishRECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBINGAWS
۲۸۰AWS D1.8/D1.8M۲۰۰۵EnglishSTRUCTURAL WELDING CODE – SEISMIC SUPPLEMENTAWS
۲۸۱AWS B4.0M۲۰۰۰EnglishSTANDARD METHODS FOR MECHANICAL TESTING OF WELDSAWS
۲۸۲AWS D14.3/D14.3M۲۰۰۵ÿ۲۰۰۰EnglishSPECIFICATION FOR WELDING EARTHMOVING, CONSTRUCTION, AND AGRICULTURAL EQUIPMENTAWS
۲۸۳AWS C1.1M/C1.1۲۰۰۰(R2006)ÿ۲۰۰۰EnglishRECOMMENDED PRACTICES FOR RESISTANCE WELDINGAWS
۲۸۴AWS C7.2۹۸EnglishRECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING AND DRILLINGAWS
۲۸۵AWS D3.5۱۹۹۳(R2000)ÿ۱۹۹۳ÿ۸۵EnglishGUIDE FOR STEEL HULL WELDINGAWS
۲۸۶AWS EWH.1۷۹EnglishEFFECTS OF WELDING ON HEALTH 1AWS
۲۸۷AWS ULR۷۶EnglishULTRAVIOLET REFLECTANCE OF PAINTAWS
۲۸۹AWS UGFM۹۵EnglishUSER’S GUIDE TO FILLER METALSAWS
۲۹۰AWS C7.1M/C7.1۲۰۰۴EnglishRECOMMENDED PRACTICES FOR ELECTRON BEAM WELDINGAWS
۲۹۱AWS C5.5/C5.5M۲۰۰۳EnglishRECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDINGAWS
۲۹۲AWS D14.4/D14.4M۲۰۰۵EnglishSPECIFICATION FOR WELDED JOINTS IN MACHINERY AND EQUIPMENTAWS
۲۹۳AWS DPW۹۹EnglishTHE DESIGN AND PLANNING MANUAL FOR COST-EFFECTIVE WELDINGAWS
۲۹۴AWS PAPQV۲۰۰۵EnglishTHE PROFESSIONAL’S ADVISOR ON PROCEDURE QUALIFICATION VARIABLESAWS
۲۹۵AWS D11.2۱۹۸۹(R2006)ÿ۱۹۸۹EnglishGUIDE FOR WELDING IRON CASTINGSAWS
۲۹۶AWS A2.4۲۰۰۷ÿ۱۹۹۸ÿ۱۹۹۳ÿ۱۹۸۶ÿ۱۹۷۹EnglishSTANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATIONAWS
۲۹۷AWS WZC۷۲EnglishWELDING ZINC-COATED STEELSAWS
۲۹۸AWS D3.6M۱۹۹۹EnglishSPECIFICATION FOR UNDERWATER WELDINGAWS
۲۹۹AWS D14.1/D14.1M۲۰۰۵EnglishSPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENTAWS
۳۰۰AWS EG4.0۹۶EnglishGUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDERAWS
۳۰۱AWS A3.0۲۰۰۱ ERRATA 2001ÿ۲۰۰۱ÿ۹۴ÿ۸۹ÿ۸۵EnglishSTANDARD WELDING TERMS AND DEFINITIONS – INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYINGAWS
۳۰۲AWS D14.5۹۷ÿ۸۰(R1991)ÿ۸۰EnglishSPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTSAWS
۳۰۳AWS PWE۲۰۰۰EnglishTHE PRACTICAL WELDING ENGINEERAWS
۳۰۵AWS EG3.0۹۶EnglishTRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 2 – ADVANCEDWELDER, GUIDE FOR THEAWS
۳۰۶AWS TSM۹۶EnglishTHERMAL SPRAY MANUALAWS
۳۰۷AWS B2.1-BMG۲۰۰۵EnglishBASE METAL GROUPING FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATIONAWS
۳۰۸AWS TSS۸۵EnglishTHERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATIONAWS
۳۰۹AWS TWM۲۰۰۵EnglishTOTAL WELDING MANAGEMENTAWS
۳۱۰AWS D14.6/D14.6M۲۰۰۵EnglishSPECIFICATION FOR WELDING OF ROTATING ELEMENTS OF EQUIPMENTAWS
۳۱۱AWS WI۲۰۰۰ÿ۹۸ÿ۸۰EnglishWELDING INSPECTION HANDBOOK, 3RD EDITIONAWS
۳۱۲AWS B2.1۲۰۰۵ÿ۲۰۰۰ÿ۹۸ÿ۸۴EnglishSPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATIONAWS
۳۱۳AWS CM۲۰۰۰ ERRATA 2000ÿ۲۰۰۰ÿ۹۴EnglishCERTIFICATION MANUAL FOR WELDING INSPECTORSAWS
۳۱۴AWS CMWS۲۰۰۵EnglishCERTIFIED WELDING SUPERVISOR MANUAL FOR QUALITY AND PRODUCTIVITY IMPROVEMENTAWS
۳۱۷AWS FMC۲۰۰۰ÿ۹۳ÿ۸۹ÿ۸۶EnglishFILLER METAL COMPARISON CHARTSAWS
۳۱۹AWS SHB۲۰۰۰EnglishSOLDERING HANDBOOKAWS
۳۲۲AWS JWE۹۷EnglishJEFFERSON’S WELDING ENCYCLOPEDIA, 18TH EDITIONAWS
۳۲۴AWS WM1.4۹۴EnglishWELDING METALLURGY 4TH EDITION, VOL. 1: FUNDAMENTALSAWS

اطلاعات بیشتر

تعداد فایل‌ها

322

حجم

1.14 گیگابایت

از ابتدا تا سال

2008

نقد و بررسی ها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین کسی باشید که دیدگاهی می نویسد “استاندارد AWS”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

بالا